Lacon L-EX73000, Quick Start Manual

Page: 170 / 184

Hardened Managed Ethernet Switch
170 User’s Manual
switch_a(config-if)#
2. Usage:
Use
ip igmp query-max-response-time
command to configure the
frequency of sending IGMP host query messages.
To return to the default frequency, use the
no ip igmp
query-max-response-time
command.
3. Command
Syntax:
ip igmp query-max-response-time RESPONSETIME
no ip igmp query-max-response-time
RESPONSETIME <1-240> Maximum response time (in seconds)
advertised in IGMP queries.
4. Example:
The following example configures a maximum response time of 8 seconds on
the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#ip igmp query-max-response-time 8
IGMP passive snooping:
Static mc router port:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2. Usage:
Use
ip igmp snooping mrouter interface
command to statically configure
the specified VLAN constituent interface as a multicast router interface for
IGMP Snooping in that VLAN.
Use the
no ip igmp snooping mrouter interface
command to remove the
static configuration of the interface as a multicast router interface.
3. Command
Syntax:
(no) ip igmp snooping mrouter interface IFNAME
IFNAME Specify the name of the interface
4. Example:
The following example shows interface fe1 (port 1) statically configured to be
a multicast router interface on
vlan1.1
:
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip igmp snooping mrouter interface fe1