Lacon L-EX73000, Quick Start Manual

Page: 119 / 184

Hardened Managed Ethernet Switch
User’s Manual 119
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use this command to specify the ingress/egress rate to be used for each
interface. The bandwidth value is in bits.
Use the no parameter with this command to remove the ingress/egress rate
to be used for each interface.
3. Command
Syntax:
(no) rate-control ingress/egress VALUE
VALUE
<1-10000000000 bits> (usable units: k, m, g)
<1-999>k|m for 1 to 999 kilo bits or mega bits.
1g for 1 giga bits.
4. Example:
The following example shows the use of rate-control ingress VALUE (
10
mega bits
) to the interface fe1 (port 1):
switch_a(config)#interface fe1
switch_a(config-if)#rate-control ingress 10m
switch_a(config-if)#
RMON Statistics
1. Command Mode: Exec mode or Privileged Exec mode
Logon to Exec Mode (View Mode) or Privileged Exec Mode (Enable Mode).
The
switch_a>
or
switch_a#
prompt will show on the screen.
switch_a>
switch_a#
2. Usage:
Use the
show interface statistics
command to display RMON statistics of
interface.
3. Command
Syntax:
show interface statistics IFNAME
IFNAME specifies the name of the interface for which RMON statistics is
desired.
4. Example:
The following example shows the use of
show interface statistics
to display
RMON statistics of the interface fe1 (port 1):
switch_a>show interface statistics fe1