Lacon L-EX73000, Quick Start Manual

Page: 153 / 184

Hardened Managed Ethernet Switch
User’s Manual 153
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
snmp-server trap-type enable coldStart
command to enable cold start
trap for SNMP.
Use the
no snmp-server trap-type enable coldStart
command to disable
cold start trap for SNMP.
3. Command
Syntax:
(no) snmp-server trap-type enable coldStart
4. Example:
The following example enables cold start trap for SNMP:
switch_a(config)#snmp-server trap-type enable coldStart
switch_a(config)#
Warm Start Trap:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
snmp-server trap-type enable warmStart
command to enable warm
start trap for SNMP.
Use the
no snmp-server trap-type enable warmStart
command to disable
warm start trap for SNMP.
3. Command
Syntax:
(no) snmp-server trap-type enable warmStart
4. Example:
The following example enables warm start trap for SNMP:
switch_a(config)#snmp-server trap-type enable warmStart
switch_a(config)#
Link Down Trap:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use
snmp-server trap-type enable linkDown
command to enable link