Lacon L-EX73000, Quick Start Manual

Page: 121 / 184

Hardened Managed Ethernet Switch
User’s Manual 121
Switching
Bridging, Static MAC Entry, Port Mirroring
Bridging
Aging Time (seconds):
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2. Usage:
Use this command to specify an ageing-out time for a learned MAC address.
The learned MAC address will persist till this specified time.
3. Command
Syntax:
Bridge GROUP ageing-time AGEINGTIME
no bridge GROUP ageing-time
Group = <1-1> The ID of the bridge-group that this ageing time is for.
AGEINGTIME = <10-1000000> The number of seconds of persistence.
4. Example:
The following example sets the new AGEINGTIME (
1000
) to bridge GROUP
(
1
):
switch_a(config)#bridge 1 ageing-time 1000
switch_a(config)#
Threshold level (0-100):
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
fe1 means port 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface fe1
switch_a(config-if)#
2. Usage:
Use
storm-control level
command to specify the rising threshold level for
broadcasting, multicast, or destination lookup failure traffic. The storm control
action occurs when traffic utilization reaches this level.
3. Command
Syntax:
storm-control level LEVEL
LEVEL <0-100> specifies the percentage of the threshold; percentage of the