TABLE OF CONTENTS
GENERAL SAFETY WARNINGS
4
GENERAL SAFETY OBLIGATIONS
4
1) DESCRIPTION OF THE MODELS
5
2) TECHNICAL SPECIFICATIONS
5
MECHANICAL SECTION
3) NEPTIS PLUS AUTOMATION COMPONENTS
6
4) PRELIMINARY CHECKS
7
5) TECHNICAL DRAWINGS
8
5.1) ASSEMBLY OF THE AUTOMATION ON THE TRANSOM FROM THE HINGE SIDE
8
5.2) ASSEMBLY OF THE AUTOMATION ON THE TRANSOM FROM THE HINGE SIDE
9
5.3) ASSEMBLY OF THE AUTOMATION ON THE TRANSOM FROM THE HINGE SIDE
10
5.4) ASSEMBLY OF THE AUTOMATION ON THE TRANSOM FROM THE SIDE OPPOSITE TO THE HINGE
11
5.5) ASSEMBLY OF THE AUTOMATION ON THE LEAF FROM THE HINGE SIDE
12
5.6) ASSEMBLY OF THE AUTOMATION ON THE TRANSOM FROM THE HINGE SIDE
13
6) MOVEMENT TRANSMISSION ARMS
14
6.1) SLIDE PULL ARM BDT2
14
6.3) SHORT SLIDE PULL ARM BDT2R55
15
6.4) SLIDING GUIDE FOR PULL ARM
15
6.5) BSS2 ARTICULATED PUSH ARM
15
6.6) EXTB-Z TAPERED PIN
16
6.7) EXTENSION FOR EXTB-Z TAPERED PIN
16
7) PREPARATION AND INSTALLATION OF THE AUTOMATION
17
7.1) TOOLS REQUIRED:
17
7.2) AUTOMATION CHECK
17
7.3) AUTOMATION INSTALLATION
18
7.4) CHOICE OF THE SPRING LOAD (FOR NEPTIS PLUS NB-LET, NB-LETB, NB-SLT, NB-SLTB AUTOMATIONS ONLY)
18
7.5) INSERTION OF THE ARM TAPERED PIN
18
7.6) SPRING RELEASE (FOR NEPTIS PLUS NB-LET, NB-LETB, NB-SLT, NB-SLTB AUTOMATIONS ONLY)
18
8) ARM REMOVAL
19
9) NEPTIS PLUS AUTOMATIONS WITH BATTERY (SLTB, LETB, SMTB MODELS)
20
10) SPRING PRE-LOAD RESETTING PROCEDURE (FOR SLT, SLTB, LET, LETB MODELS ONLY)
21
ELECTRONICS
11) ELECTRIC ARRANGEMENTS
22
12) ELECTRIC CONNECTIONS
23
13) PWB ELECTRICAL WIRING AND POWER SUPPLY MODULE
24
13.1) LOGIC CARD LCB
26
14) DIGITAL SELECTOR ET-DSEL – PURPOSE AND CONNECTIONS
26
15) SAFETY SENSORS
27
15.1) SAFETY SENSOR OA-EDGE T
27
15.2) FLAT SCAN SAFETY SENSOR
27
16) COMMISSIONING OF THE AUTOMATION (INITIAL SETUP)
28
16.1) FIRST START OF THE DIGITAL SELECTOR ET-DSEL
28
16.2) SERIAL COMMUNICATION SETTINGS
28
16.3) INITIAL SETUP
29
16.4) FUNCTIONAL TESTING
31
16.5) INPUT DIAGNOSTICS
31