6) ASSEMBLY OF PARTS
Cut the rail gasket (17) 24mm shorter with respect
to the total length LT
Cut the sliding rail (14) 60mm shorter with
respect to the total length LT
Cut the covering guard (15) 24mm shorter with
respect to the total length LT
Cut the transom (13) 24mm shorter with respect to
the total length LT
Insert the rail gasket (17) in the lower slot of the transom making it adhere completely for the whole length and then
insert the sliding rail (14) on the rail gasket.
In order to facilitate the insertion, it is advisable to use a carriage with two lower wheels leaning on the
sliding rail and the central wheel adhering to the upper guide of the transom, and then to make it slide all
along the rail easing the rail positioning on the gasket.
1
2
7
3
4
5
6
1
2
1
1
4
3
1
6
5
Summary of Contents for EVOLUS
Page 2: ......
