Insert No. 10 nuts M6 in the upper slot of the transom which will be used to fix the motor, the control unit,the idle pulley
and the two cover links. In case three cover links are used (for transoms longer than 4500mm.), insert No. 12 nuts M6.
Insert No. 4 nuts M6 in the lower slot of the transom which will be used to fix the opening mechanical limit switch and
the closing mechanical limit switch or the electric lock, if any and if required.
7
8
Insert the carriage (5) in the transom and vertically adjust the central wheel by operating on the adjustment screw,
and by keeping the two side wheels leaning on the lower sliding guide.
The central wheel must only skim the upper part of the transom without pressing, so that the carriage can slide freely.
Now, take care that the carriage cannot get out of its seat
and that the central wheel performs its duty of anti-
derailment.
Insert two carriages for each leaf in the transom. In case of
double leaf, there are 4 carriages, the two internal
carriages have a belt coupling and the two external
carriages are free.
In case of single leaf, there are 2 carriages, the carriage on
the left has a belt coupling and the carriage on the right is
free, regardless of the opening direction.
Assemble the electric lock coupling bracket in the
first carriage on the left with respect to the electric lock,
if any, using No. 2 screws M5 X 8.
9
10
8
8
7
9
10
Summary of Contents for EVOLUS
Page 2: ......
