9
Assemble the electric lock coupling bracket in the
first carriage on the right with respect to the electric
lock, if any, using No. 2 screws M5 X 8.
Assemble the lower belt coupling in the left carriage, in case of single leaf, or in the internal carriage of the left leaf, in
case of double leaf, by using No. 2 screws M5 X 8.
Then assemble the belt block on the belt coupling by using No. 2 screws M5 X 10.
Assemble the upper belt coupling in the internal carriage of the right leaf, in case of double leaf, by using No. 2
screws M5 X 8.
Lower belt coupling
Upper belt coupling
Fix the mechanical limit switch (10) to the left side of the transom, as per fig. 3, 4, 5 using screws M6 x 10 with
washers M6.
Apply the rubber buffer on the outer rh border of the limit switch.
This mechanical limit switch corresponds to the opening limit switch in case of double leaf door or single leaf door
with leftward opening, and to the closing limit switch in case of single leaf door with rightward opening without electric
lock.
11
12
13
14
15
11
12
13
14
15
Summary of Contents for EVOLUS
Page 2: ......
