Product Service 1-800-522-7658
2
Chapter 2:
Prerequisites
Carefully read this chapter to learn:
Supplies required.
Electrical power requirements.
Exhaust requirements.
Supplies Required
Before you use the Fuming System, you need get the following items:
1 bottle of CA glue (the capacity of the filter is approximately
2 ounces (57gm))
Note:
For best results, do not use CA with thickening or gap filling
formulations.
A supply of aluminum heating pans, in addition to the 10 shipped
with the unit. A bag of 250 pans is available as Labconco part
number 34252002.
A supply of Rain-X
1
or Rain Block
2
to treat the clear chamber before
use.
Exhaust Requirements
If you intend to connect the system to the optional Exhaust Connection Kit,
first examine the location to ensure that the exhaust duct can be directed
either out of the immediate area (through a partially opened window), or
into a chemical fume hood. For further information about the CApture
’s
exhaust system requirements, please refer to Appendix D: Accessories
.
Note:
For best results, do not add any additional exhaust duct to that
already supplied in the exhaust connection kit. Additional lengths of duct
1
Rain-X is a registered trademark of Sopus Products.
2
Rain Block is a trademark of Value Smart Products, Inc.
