Chapter 2: Prerequisites
Product Service 1-800-522-7658
3
will reduce the exhaust flow out of the chamber, possibly resulting in
incomplete venting of the CA fumes.
Electrical Requirements
The system models have the following electrical requirements:
Model #
Requirements
3420000
115 VAC, 60 Hz, 1 Amp
34200-20, -22, -24
230 VAC, 50/60 Hz, 0.5 Amp
Note: An outlet with a circuit breaker rated at 10 amps for 115 volt
models (5 amps for 230 volt models) should be located as close as
possible to the system. Power cords supplied with the print system
are 3 meters (10 feet) long.
Note: The system can be operated on an inverter, converting 12 Volts
DC to the appropriate AC voltage. The inverter should have an output
rating of at least 100 Watts, and protected against current overload
for proper operation.
Table 2-1
