Chapter 4: Using the System
Product Service 1-800-522-7658
14
4. Select the hooks or shelves
needed to hang or support the
evidence to be developed.
Engage the hooks and/or
shelves into the appropriate
holes on the stainless steel
face plate, as shown in Figure
4-5.
5. Place the evidence so that
fumes can contact as much of
its surface as possible. If
desired, place a control
fingerprint on a glass slide,
and set the slide into one of
the slide slots in the face plate.
6. Seal the clear chamber to the stainless face plate, using the clamps
on either side of the chamber. The unit is now in operating mode,
as shown in Figure 4-2a and 4-2b.
7. Plug the unit in, and make sure the main power switch is in the
“ON” position.
Figure 4-5
