Laars IGI-180R-10N, Installation And Operating Instruction Manual

Page: 54 / 68

54
SCALDING
Figure 50
This water heater can deliver scalding temperature water at any faucet in the system. Be careful
whenever using hot water to avoid scalding injury. Certain appliances such as dishwashers and
automatic clothes washers may require increased temperature water. By setting the thermostat on this
water heater to obtain the increased temperature water required by these appliances, you may create the
potential for scald injury. To protect against injury, you should install a tempering valve in the water
system. This valve will reduce point of discharge temperature by mixing cold and hot water in branch
supply lines. Such valves are available from the local plumbing supplier.
CAUTION
Test the temperature of the water with your elbow before placing a child in the bath or shower. Do not
leave a child or an infirm person in the bath unsupervised.
The following chart details the relationship of water temperature and time with regard to scald injury and
may be used as a guide in determining the safest water temperature for your applications.
Approximate Time/Temperature Scald Chart
APPROXIMATE TIME/TEMPERATURE
RELATIONSHIPS IN SCALDS
120°F (49
°
C)
More than 5 minutes
125°F (52
°
C)
1½ to 2 minutes
130°F (54
°
C)
About 30 seconds
135°F (57
°
C)
About 10 seconds
140°F (60
°
C)
Less than 5 seconds
145°F (63
°
C)
Less than 3 seconds
150°F (66
°
C)
About 1½ seconds
155°F (68
°
C)
About 1 second