Installation
14
Output heating capacity is reduced if these heaters are installed on 415V, 400V, or 380V 3-ph.
Contact a Laars representative to supply this information.
Satisfactory performance of the heater is dependent upon a specific flow rate vs temperature rise capability.
If the
desired temperature is not achieved, please verify the following:
1.
Circuit breaker is on and rated for the maximum power draw.
2.
Heater is drawing the proper current for the supply voltage on all three phases.
3.
All element load indicator lights are lit (not flashing) indicating maximum power draw and maximum amperage
is being drawn.
4.
Flow rate and temperature rise in the water heating process are compatible with the heater specifications.
5.
Verify there is no additional supply of cold water entering the line downstream of the heater.
Product Options
AL High-Low Temperature Alarm:
Alerts user to an over or under temperature situation.
FDS Fused Disconnect:
Internal fused disconnect interlocks with enclosure door when energized, prohibiting access
to a live cabinet
.
Select the FDS option for an additional level of safety and convenience at the heater location
.
LS (Level Sensor):
Prevents accidental dry fire.
T170, T180 & T190 High Temperature Option:
High temperatures as indicated (maximum of 170°F/76.7°C,
180°F/82.2°C, 190°F/87.8°C).
D1 Control Interface:
Provides 4–20ma communication interface with temperature controller.
DC Control Interface
: Is an RS-485 Modbus RTU and allows Building Management Systems to view heater outlet.
TE2 Corrosive Fluid Protection:
The TE2 option is a single layer of Xylan Fluoropolymeric coated heat exchanger with
bright annealed stainless steel elements, FDA Approved for Food Contact (use in deionized water applications).
N4X (NEMA 4X Enclosure):
The optional NEMA 4X corrosion resistant enclosure is designed for harsher environments
and made from 16 gauge 304 stainless steel.
N4 (NEMA 4 Enclosure):
The optional 18 gauge, NEMA 4 enclosure with ANSI61 gray, corrosion resistant paint.
NEMA 4 is standard on model LCTEH025.
