12
Should the problem not resolve, please contact LAARMANN.
7.
Troubleshooting
8.
Maintenance
LM250/LM1000 needs to be greased first time after 20 hours.
Later intervals each 40 Hours.
LAARMANN advises to use LAARMANN GREASE. Similar can be graphite free, high temperature grease.
8.1
Wear
The milling tools can become worn out, depending on the frequency of the milling operation and the milled
material. The milling bowl, lid and puck should be regularly checked for wear and replaced, if necessary.
Before cleaning the machine, unplug the mains cord from wall socket.
Use only a soft cloth moistened with water. Cleaning agents and solvents should not be used, not
for cleaning the milling tools either.
Do not clean the
LM250/LM1000
under running water. Danger to life through electric shock.
Problem
Explanation / Solution
Machine is not starting
Check the mains power supply.
Check the air pressure
Call the emergency knob and release it.
Check if you have the correct settings for running the
program.
Display doesn
’
t work.
Call authorized service.
8.2
Cleaning
LM250/LM1000 PULVERISER RING MILL MANUAL
