In case of this message, please check the pressure coming from the supply.
The pressure should be around 7
-
8 to ensure smooth operation. Also check if there is no air escaping
within the system.
Open the side panel with the delivered keys to verify that the machine receives enough pressure.
In case of this message, please check all the emergency stops and verify that the installation doors are
correctly closed.
To release the emergency stop you need to turn it and it will come up.
After verifying that all stops are checked press the message to continue.
10
In case of this message, please close the hood an press
“
lock the Lid
”.
If this message comes up when the lid is closed and you have pressed
“
lock the Lid
”
carefully check if
you can open the hood or not. After verifying press to reset and check again.
In case of this message please contact authorised personnel to check the motor of the machine.
After visual inspection and ensured that no parts are either broken or damaged, contact an electrical
engineer to verify the connections.
When everything is checked, run the machine in hand control without grinding media inside. If the machine
works properly you can resume using it as normal.
Should it still not work, please contact Laarmann.
LM250/LM1000 PULVERISER RING MILL MANUAL
