S1 Dream-T Espresso Machine
Owner’s Manual
Page 5
You can also pull a shot using the manual button
The manual button will use the existing
temperature setting, but will not turn off on its own. To pull a shot with the manual button press
the button to start the shot and then press the button again to stop the shot when it has
reached the desired level. This button is also useful for cleaning the group, backflushing, and
rinsing or pre-heating the portafilter.
Note:
After pulling a shot the shot timer will display the previous shot length for 3 seconds.
During this time the shot and manual buttons will not be active. In version 1.19 the shot timer
will be displayed for 10 seconds and the shots buttons can be used while being displayed.
Turning The Steam Boiler On And Off
The steam boiler can be turned on/off independently
from the coffee boiler. This is helpful if you will not be steaming milk and want to save on
energy consumption. To turn the steam boiler on press the
button. Press the
button
again to turn the steam boiler off.
Using The Hot Water Faucet
To use the hot water faucet the steam boiler must be on and up
to pressure. Under the menu in profiles the hot water faucet can be set up to work as a manual
button or can be programmed to discharge a set amount of water each time. For manual mode
if you press the
button, the water will start to flow and then press the
button again to
stop the flow of water. It is not recommended to remove more than 6oz of water at any given
time until the boiler has had time to refill.
In automatic mode the
button can be programmed to give a pre-set amount of water and
will automatically stop dispensing without having to press the
again to stop dispensing.
Accessing The Menu
To access the menu press and hold the
button for approximately 3
seconds until the menu appears on the display. Then use the up/down arrow keys to cycle
through the menu and then press the
button to select a menu item to view or change.
To exit the menu press the up arrow key until “Home” is displayed at the top of the screen and
then press the
button to return to normal operation.
Understanding The Display
The display is the information center for the S1 Dream-T. It will tell you the machine status,
time of day, boiler temperatures, and will also give you an alarm message in the event of a
component failure. The diagram below shows the display in normal operation mode.
1. Current Active User Profile
2. Coffee Boiler Temperature
3. Time Of Day
4. Icon Is Shown When Steam Boiler Refills
5. Icon Indicates Steam Boiler Is Turned On
6. Steam Boiler Temperature
(Steam boiler must be on)
