La Pavoni VASARI, Operating Instructions Manual, Page: 33 / 72

English
33 32
a
b
c
d
e
f
g
a - Water inlet.
b - Water outlet.
c - Inlet tap.
d - Outlet tap.
e - Vacuum pipe.
f - Regeneration pipe.
g - Lid knob.
Now move the ( d ) handle from right to left.
During regeneration, do not use the machine; for machines equipped
with automatic level indicator it is advisable to cut off the pump power
supply, to prevent no-load operation.
Before connecting the softener to the machine, wash the resins, by
establishing a connection to the water mains and letting water run for
five minutes.
N.B. The above mentioned directions relate to the softener shown in
the pictures; if your equipment differs, follows the directions attached to
softener in question.
18 – MACHINE DEMOLITION
Should you decide to no longer employ the machine, owing to wear
or to other reasons, we recommend that, once you have removed the
plug from the socket, you deactivate it by cutting off the supply cable.
As regards the demolition procedure, we recommend you separate
the various parts of the machine, depending on their nature (pla-stic,
metal, etc.). Hence employ specialised firms for the disposal of the
various parts.