background image

  1: Frame

  2: Base frame

  3: Support post (Left)

  4: Support post (Right)

  5: Screws

  6: Nuts

7A: Power plug

7B: Power wire

  8: Handlebar

  9: Console

10: Screws

11: Bottle holder

12: Safety key

13: Support post housing

      (Upper left)

14: Support post housing

      (Lower left)

15: Screws

16: Support post housing

      (Upper right)

17: Support post housing

      (Lower right)

18: Screws

19: Washers

20: Screws

Optional parts:

21: Book holder

22: Book holder bracket (2pcs)

23: Screws M5 X 10L (4pcs)

24: Screws M4 X 8L (4pcs)

LOHAS T1

ASSEMBLY INSTRUCTION

Parts

Hardware

Screws already in place on the treadmill:

Screws in the plastic bag:

Tools:

     WARNING

After unpacking the fitness equipment, examine it carefully for possible damage. If there is any damage or there are missing parts, please contact 

your retailer or an authorized repair facility for assistance.

1. Since your treadmill is a heavy piece of equipment, we recommend the after taking off the top portion of the box; you slit the corners of the 

    lower carton and fold down the sides. This will eliminate the need to pick up the treadmill over the sides of the box.

2. Prior to starting the assembly process take all the parts out of the box, remove all plastic bags, and then lay them out on the floor to become 

    familiar with the components. Make sure that you remove all parts packaged underneath the treadmill. You may need to slightly pick up the 

    back of the treadmill to get better access to the parts on the bottom. You will notice that the treadmill is completely assembled except for the 

    handle bars and the display window.

5

2

1

8

7A

17

15

5

6

14

6

15

12

11

4

3

18

13

9

18

16

10

10

7B

5: Screw

M10 X 60L (2pcs)

10: Screw

M8 X 70L (4pcs)

Wrench-6mm

Wrench-5mm

Wrench

Screwdriver

6: Nylon nut

M10 X 10t (2pcs)

15: Screw

#8 X 5/8”L (2pcs)

18: Screw

#8 X 3/4”L (2pcs)

20: Screw

M8 X 15L (4pcs)

19: Washer

M8 (4pcs)

21

24

22

23

2

Summary of Contents for LOHAS T1













Reviews: