background image

 

12 

 

Sunny 

Cloudy 

Rainy 

To stop the alarm, press any key (except the DISPL and 

 

keys

)

 during alarm ringing. Or press and hold 

the SNOOZE key for 2 seconds (a beep sound can be heard). 
 

WEATHER FORECAST AND WEATHER TENDENCY INDICATOR: 
 
 
 
 
 
 

 
 

 

WEATHER FORECAST ICONS 

The weather forecast can be displayed a s follow: 

 
 
 
 
 
 

 

For every sudden or significant change in the air pressure, the weather icons will update accordingly to 
represent the change in weather. If the icons do not change, then it means either the air pressure has not 
changed or the change has been too slow for the weather projection station to register. However, if the icon 
displayed is a sun or raining cloud, there will be no change of icon if the weather gets any better (with sunny 
icon) or worse (with rainy icon) since the icons are already at their extremes. 

 

The icons displayed forecasts the weather in terms of getting better or worse and not necessarily sunny or 
rainy as each icon indicates. For example, if the current weather is cloudy and the rainy icon is displayed, it 
does not mean that the product is faulty because it is not raining. It simply means that the air pressure has 
dropped and the weather is expected to get worse but not necessarily rainy. 

 

Note:

 

 

After setting up, readings for weather forecasts should be disregarded for the next 12-24 hours. This will 
allow sufficient time for the weather projection station to collect air pressure data at a constant altitude and 
therefore result in a more accurate forecast. 

 

Common to weather forecasting, absolute accuracy cannot be guaranteed. The weather forecasting feature 
is estimated to have an accuracy level of about 75% due to the varying areas the weather projection station 
has been designed for use. In areas that experience sudden changes in weather (for example from sunny to 
rain), the weather projection station will be more accurate compared to use in areas where the weather is 
stagnant most of the time (for example mostly sunny). 

 

If the weather projection station is moved to another location significantly higher or lower than its initial 
standing point (for example from the ground floor to the upper floors of a house), discard the weather 
forecast for the next 12-24 hours. By doing this, the weather projection station will not mistake the new 
location as being a possible change in air-pressure when really it is due to the slight change of altitude.  
 

 

Weather Boy icon 

Weather tendency indicator

Weather forecast icon 

Summary of Contents for WS-9520U



















Reviews: