background image

 

11 

 

Icons 
flashing

The temperature display can be selected to show temperature data in °F or °C (Default °F). 
1. 

Use the CH/+ key to toggle between “°F” or “°C”. 

2. 

Confirm with the SET key and enter the

 

Weather forecasting icon sensitivity setting

 

WEATHER FORECASTING ICON SENSITIVITY SETTING: 

 
 
 
 
 

 
 
 
 

 

For locations with rapid changes of weather conditions, the weather icons can be set to a different level for 
faster display of weather conditions.  
1. 

The current sensitivity value will start flashing. 

2. 

Use the CH/+ key to set the weather sensitivity level. There are 3 levels of setting: 1, 2 and 3; level 1 
is the most sensitive setting; level 3 is the slowest recording setting (default setting is "2"). 

3. 

Confirm with the SET key and exit the

 

Manual settings

ALARM SETTING: 

 
 
 
 

 

 
 
 
 

The alarm time can be set when pressing the ALARM 1 or ALARM 2 key. 
1. 

Press the ALARM 1 or ALARM 2 key until the alarm digits flash. 

2. 

Use the HOUR/IN key to set the alarm hour.  

3. 

Use the MIN/OUT key to set the alarm minute. 

4. 

Confirm with the ALARM 1, ALARM 2, or Snooze key and exit the

 

Alarm setting

.  

 

Note: 

The maximum alarm ring duration is 2 minutes

.

 The alarm setting can be activated or deactivated manually 

by pressing the ALARM 1 or ALARM 2 key, depending on which one is activated. The alarm icon will be 
displayed on the LCD if the setting is activated. 

 
SNOOZE ACTIVATION AND STOPPING THE ALARM:

 

The snooze function can be activated when the alarm is ringing by pressing the SNOOZE key. However the 
snooze will only be activated when the snooze time is set other than OFF in snooze setting.  
Otherwise the snooze function will not be activated. 

 

When the alarm is snoozing, the alarm icon ((1)) or ((2)) will start flashing indicating that the alarm is active 
but is in Snooze mode. To stop the snooze function when it is in snooze period, press and hold the 
SNOOZE key for 2 seconds until a “Beep” is sounded. You can also press the HOUR/IN or MIN/OUT keys 
once to stop the snooze function. 

Alarm icons

Alarm time 

Digit 
flashing

Summary of Contents for WS-9520U



















Reviews: