•
-8 PST (Pacific time),
•
-9 ALA (Alaska time),
•
-10 HAW (Hawaii time).
•
"GMT” will be displayed if set to GMT (0).
2.
Press and release the
SET
key to enter the
“DST Setting“
.
DST SETTING (daylight saving time)
1.
The ON digit will start flashing on LCD1. Set the DST ON or OFF by pressing the
+
key.
2.
Press and release the
SET
key to enter the
“Language Setting“
.
Note:
The DST default is “ON”, meaning that the WWVB will automatically change the time according to
Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona
and parts of Indiana) turn the DST “OFF”.
LANGUAGE SETTING
The weekdays can be displayed in LCD2 with the pre-set languages: US English, French, Spanish
and German.
1.
Set the desired language for the weekday display in LCD 2 by use of the
+
key.
2.
Press and release the
SET
key to enter the mode
“Manual Time Setting”
.
MANUAL TIME SETTING
In case the atomic clock is not able to detect the WWVB-signal (disturbances, transmitting distance,
etc.), the time can be manually set. The clock will then work as a normal Quartz clock.
Note
: In 12 hours mode the time will be displayed with an additional
“
PM
”
for the time from 12:00
noon until 11:59.
1.
The hour digits will start flashing on LCD1.
2.
Set the desired hours by pressing and releasing the
+
key followed by pressing the
SET
key.
3.
Now the minute digits will start flashing.
4.
Set the desired minutes by pressing and releasing the
+
key . If the
+
key is held, the units will
increase by 5.
5.
Press and release the
SET
key to move to the
“Year Setting”
.
Note:
The unit will still try and receive the signal every day despite it being manually set. When it does
receive the signal, it will change the manually set time into the received time. During reception
attempts the WWVB tower icon will flash. If reception has been unsuccessful, then the WWVB tower
icon will not appear but reception will still be attempted the following hour.
WWVB time reception takes place from 12:00 am through 6:00 am each day (attempts WWVB
reception every full hour within this time frame). When the time signal is received for example at 1:00
am, the atomic clock will not attempt to receive the WWVB signal for the remaining hours until 6:00
am. Therefore, the next signal attempt will take place between 12:00 am and 6:00 am the next day.
The other times WWVB reception takes place, are upon setup and after manual time set exiting
mode. Reception is generally not possible during daylight hours due to the interference of the sun.
YEAR SETTING
The year can be selected sequentially from 2000 to 2049 and will then start over again (default
setting 2000). Only the last 2 digits of the year will be visible on LCD2 .
1.
The year digits will start flashing on LCD2. Select the desired year by use of the
+
key.
2.
Press and release the
SET
key to switch to the
“Month Setting”
.
MONTH SETTING
1.
The month digits on LCD2 will start flashing. Set the desired month by use of the
+
key.
2.
Press and release the
SET
key to move to the mode
“Date Setting”
.
DATE SETTING
1.
The digits for the date will start flashing on LCD2 (Default setting 1). Set the desired date by
use of the
+
key.
Note:
The date can only be set in conjunction with the selected month. For example, it is not
possible to set the date 30 if the month of February is selected.
2.
Press and release the SET key to enter the
“Weekday Setting”
.
WEEKDAY SETTING
1.
The weekday symbols will be displayed on LCD2 in the pre-set language and flashing. Set the
desired weekday by use of the
+
key.
2.
Press and release the
SET
key to enter the mode
“12/24 Hours Time Display Setting”
.
12/24 HOURS TIME DISPLAY SETTING
1. The
“12h”
or
“24h”
will start flashing in LCD1 (Default setting 12h). Select the desired time
display mode by use of the
+
key.
2.
Press and release the
SET
key to enter the
“ºC/ºF Temperature Setting“
.
