MANUAL SETTINGS
Note:
Weather Icons
If the atomic clock has already successfully received the WWVB time signal and displays the
correct time and date, then the Manual settings can be skipped
.
There are 3 possible weather icons that will be displayed in the LCD 2:
After completion of the above described procedures in “
Setting up”
the manual setting modes can
be entered by pressing and holding the
SET
key for 3 seconds. The following settings can now be
programmed:
•
Sunny
—indicates that the weather is expected to improve (not that the weather will be sunny).
Time zone setting
DST ON/OFF
•
•
•
•
•
•
•
•
•
Language display setting
Manual time setting
Year setting
Month setting
Sun with Clouds
—indicates that the weather is expected to be fair (not that the weather will be sunny
with clouds).
Date setting
Weekday setting
Clouds with Rain
—indicates that the weather is expected to get worse (not that the weather will be
rainy).
12/24 hour time display setting
ºC or ºF setting
The weather icons change when the unit detects a change in air pressure. The icons change in order,
from “sunny” to “partly sunny” to “cloudy” or the reverse. It will not change from “sunny” directly to
“rainy”, although it is possible for the change to occur quickly. If the symbols do not change then the
weather has not changed, or the change has been slow and gradual.
TIME ZONE SETTING
After entering the manual setting mode as described above, the time zone can be set between the –1
to –12 hour or Greenwich Mean Time (GMT) range in LCD2. To do this:
Weather Tendency Arrows
Other possible displays in LCD 2 are 2 weather tendency arrows, one that points up (on the left side
of the forecast) and one that points down (on the right side of the forecast). These arrows reflect
current changes in the air pressure. An arrow pointing up indicates that the air pressure is increasing
and the weather is expected to improve or remain good. An arrow pointing down indicates that the
air pressure is decreasing and the weather is expected to become worse or remain poor. No arrow
means the pressure is stable.
1.
The time zone (LCD2) will start flashing (Default setting "-5h“). Select the desired time zone by pressing
and releasing the
+
key.
Note:
The time zones from –4 to –10 hours will be displayed with 3 characters abbreviations:
•
-4 ATL (Atlantic time),
•
-5 EST (Eastern time; default time zone),
•
-6 CST (Central time),
•
-7 MST (Mountain time),
