11
Step 3: LIFT
Remove the protective plastic cover from the Ion head before use if not removed previously.
1.
Press +/- treatment button 3 times so the LIFT light is iluminated and select level as before.
2.
Apply serum and/or hydrating toning spray to the area being treated, we recommend
working in sections to ensure the skin is well lubricated. Most people feel no sensation
when using the Ion head. As long as the lights on the control panel are lit up Pro-Lift+ is
working.
3.
Starting at the base of the neck and working upwards and outwards, slowly glide the
treatment head across the face. Ensure your finger is in contact with the conductive panel
at all times.
- Each motion should be steady and take approx 5 seconds moving from the centre of the face
outwards toward the hair line.
- Repeat each position 5 times.
- Avoid lingering around the eye area.
- Use anti-gravity motions, thinking where do you want your face to be!
- For the forehead use vertical motions.
- For stubborn wrinkles you can hold the device in one place for the treatment time.
Keep treatment area well lubricated to ensure treatment head glides over skin at all times by
applying the Conduction toning spray during use as required. See diagram on page 12 and go
online for video clips and more information: www.lab-lifeandbeauty.com
4.
After 4 minutes a short beep will sound to signal the end of your treatment. You can do a whole
face in 4 minutes or for a more intensive treatment you can continue to use for up to 20 minutes
a day. If you want to continue, after 4 minutes put back into lift mode and repeat.
For best anti-ageing results use for a minimum of 4 minutes daily for the first month with L(A)B
Activator serum and Hydrating Toning Spray.
