13
Step 4 : Blue LED Light
1.
Install Blue LED light treatment head.
2.
If you have not already completed steps 1 and 2 remove makeup and cleanse your face, then
towel dry.
3.
To turn on Pro-Lift+, press and hold On/Off power button for 2 seconds until a long beep
sounds. Press the Photofacial button.
4.
Hold the treatment head in contact with the area of the face to be treated for 3 minutes.
Blue light will be visible on contact with the skin. For effective treatment the treatment head
must be held in constant contact for 3 minutes, do not move/ glide treatment head when using
LED lights. The LED lights do have a natural pulse, this is normal.
5.
After 3 minutes a short beep will sound to signal to move to the next position to treat.
You can treat just the areas that suffer from blemishes or are prone to break-outs, or for a
complete facial treatment follow the 6 positions shown in the diagram on page 15, holding the
treatment head in contact with each area for 3 minutes each time.
