16
General Information
To turn on : press and hold the Power Button for 2 seconds until a long beep sounds.
Once turned on, Pro-lift+ is in standby mode and will automatically turn off if left unused for 4 minutes.
Pro-lift+ returns to standby mode whenever you uninstall a treatment head.
Most people feel no sensation when using the Ion head. As long as the lights on the control panel are
lit up Pro-Lift+ is working.
Remove the protective plastic cover from the Ion head before use.
At any time during treatment with the metal treatment head you may switch between CLEANSE,
NOURISH and LIFT treatments by pressing the ION Treatment Button, or between power levels by
pressing the POWER LEVEL button.
Turn off Pro-Lift+ before changing heads.
When using the metal treatment head always retain contact with the conduction panel. Do not rub
or press treatment head hard against the skin as this may cause damage or irritation. Always ensure
skin is moistened with water-based skincare products.
You might feel a slight tingling “electrical” sensation during use. It is a normal sensation and will not harm
your skin. If you experience this ensure skin is well lubricated with L(A)B Activator serum, moisturiser
or toning spray (or other water-based skincare product).
The LED lights do pulse, this is normal.
For best results use with L(A)B Skincare: Cleanser, Moisturizer, Activator Serum and Hydrating Toning
Spray. If using other skincare ensure it is water-based (check Aqua is one of the ingredients). If in doubt
contact L(A)B: [email protected]
