KYOKUTOH TM01-KP-00A, Instruction Manual

Page: 15 / 51

12
3.3 Control Interface Setting
The system requires control interfaces such as CC-Link, DeviceNet.
Please follow the manual to set up as shown below.

Installation of attached software.

Attaching interface board, installation of drive.

Connection setting of the attached software and the PLC.(Confirm the setting which will be used for the
PLC)
【
CC-Link Set Up
】
(Mitsubishi Electric Q80BD- J61BT11N)
①
Set the allotment of Station No. /Type.
②
Set the Occupied Sta. as
“
Occupied 4 stations
”
③
Set the Transmission Rate the same as the PLC.
④
Click the
“
Online Operation
”
tab.
⑤
Click
“
Write
”
.
※
When setting up the PLC, please set the I/F Board as the intelligent device.
For more information, please refer to the manual of Mitsubishi Electric.
②
①
③
④
⑤