Kyocera Triumph-Adler P-4025w Operation Manual Download

Page: 51 / 190

3-20

Sending Faxes > FAX Direct Transmission

Cancelling Delayed Transmissions (Queued)

Display the screen.

[

Status/Job Cancel

] key > [

▲

] [

▼

] key > [

Scheduled Job

] > [

] key

Display the scheduled job screen.

Canceling a job.

Select the job you want to cancel and select [

Cancel

] > [

Yes

The selected job is deleted.

Immediate transmission

Display the screen.

[

Status/Job Cancel

] key > [

▲

] [

▼

] key > [

Scheduled Job

] > [

] key

Display the scheduled job screen.

Immediate transmission.

Select the job you want to send by immediate transmission, select [

Menu

] > [

▲

] [

▼

] key >

[

Start Now

] > [

] key > [

Yes

The transmission will start.

FAX Direct Transmission

The destination is dialed and communication starts before the original is scanned, allowing you to verify that each page
of the fax has been properly sent.

Cancelling Direct Transmission

During direct transmission, to cancel communication during transmission, select the [

Stop

] key on the operation panel.

The originals that have been scanned are ejected, and the screen returns to the send default screen. When originals

remain in the document processor, take them out.

Setting for Direct transmission

Description

Starts direct transmission.

Dials the receiving system, and after the communication has started, originals are

scanned.

Off

Starts memory transmission.

After originals are scanned into memory, the communication starts.

NOTE

In direct transmission, you can designate only one destination for one transmission.

NOTE

In some cases, transmission may take place even if the [

Stop

] key is selected.

Summary of Contents for Triumph-Adler P-4025w































































































































































































Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands

Kyocera Triumph-Adler P-4025w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands