Kyocera Triumph-Adler P-4025w Operation Manual Download

Page: 150 / 190

8-9

Fax Settings > Default fax settings

TX/RX Restriction

This function allows you to send or receive originals only when communication requirements are met.

Select Key Set. (Select Key Settings)

If you register a function to the Left Select key or Right Select key, you can quickly set the function when using fax functions.

Dest. Entry(FAX)

Duplex Printing

When received multiple pages of data are the same width, they can be printed out on both
sides of paper having the same width as the data.

Value

: Off, On

Duplex Printing (page 4-7)

ECM RX

Set whether ECM RX is performed.

ECM is a communication mode specified by the ITU-T (International Telecommunication Union)

that retransmits data when an error occurs. Fax machines that have ECM mode check for

errors as they communicate, preventing distortion of the image due to noise on the line and

other conditions.

Value

: On, Off

NOTE

When there is a large amount of noise on the line, communication may take slightly longer than
when [

Off

] is selected.

RX Start Speed

Change the RX Start Speed.

When communication conditions are bad, the fax may not be received correctly. In that case,

set a lower RX Start Speed.

Value

: 9600bps, 14400bps, 33600bps

NOTE

Normally this should be used with the default setting.

Item

Description

Left

You can register one of the following functions to each key.

Value

: None, Original Size, Original Image, FAX Resolution, Orig.Orientation, Continuous

Scan, File Name Entry, JobFinish Notice, FAX Delayed TX, FAX Direct TX, FAX RX Polling,
FAX TX Report, Density, Duplex

NOTE

[

FAX TX Report

] is displayed when [

FAX TX Result

] is set to [

Specify Each Job

Send Result Reports (page 7-4)

Right

Item

Description

Dest. Entry(FAX)

Select whether to permit direct entry of destination. When this option is set to [

Prohibit

you cannot enter the destination directly.

Value

: Permit, Prohibit

NOTE

If [

Prohibit

] is set for new destination entry in [

Send

] in system menu, this option cannot be set.

Item

Description

Summary of Contents for Triumph-Adler P-4025w































































































































































































Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands

Kyocera Triumph-Adler P-4025w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands