Kyocera Triumph-Adler P-4025w Operation Manual Download

Page: 126 / 190

6-26

Sending Faxes from PC > Basic Transmission

Check the contents of the Cover Page.

Click on the [

Preview

] button. A preview of the currently selected template will be

displayed.

To display a different template, use the drop-down menu at the top of the dialog box or click
on the [



] or [



] button. The template display magnification can also be changed within the

range of 25 to 250% from the drop-down menu.

Click on the [

Close

] button.

Edit the Message.

Click on the [

Edit Message

] button.

Enter the message to be added to the Cover Page and click on the [

] button.

A maximum of 1,000 characters can be entered.

Click on the [OK] button.

Summary of Contents for Triumph-Adler P-4025w































































































































































































Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands

Kyocera Triumph-Adler P-4025w, Operation Manual

Search results

Summary of Contents for Triumph-Adler P-4025w

Reviews:

Related manuals for Triumph-Adler P-4025w

Brands by name

Popular brands