Kyocera pdQ2 User Manual Download Page 52 | Manualshive

Page: 52 / 63

background image

48

pdQ

2

User’s Guide

DRAFT

an additional battery, if you wish, and charge it in the cradle along with
the phone.

Tips for improving battery performance

❑

Select a shorter “Auto-off after” time on the General Preferences
screen. This feature turns off the PDA after a set number of minutes
of non-use. The shorter a time you select, the more energy is saved.
See “Entering information” on page 19.

❑

Minimize the use of the backlight.

❑

If you don’t use the Beaming feature to receive data from other
devices, leave the Beam Receive setting at Off. See “Entering
information” on page 19.

❑

If you don’t plan to make or receive calls, you can use the PDA
without turning on the phone.

❑

Do not disassemble or short-circuit the battery.

❑

Keep the metal contacts at the base of the battery clean.

❑

If you have not used an internal or external battery for more than a
month, recharge it before using it.

❑

Do not charge any battery if the temperature is below 32ºF (0ºC) or
above 122ºF (50ºC).

❑

Do not store any battery in hot areas for long periods of time. Use
these storage guidelines:
under 1 month: -4º to 140ºF (-20º to 60ºC)
over 1 month: -4ºF to 113ºF (-20º to 45ºC)

pdq2_QuickStart.book Page 48 Friday, July 28, 2000 6:37 PM

«
...
50
51
52
53
54
...
»

Summary of Contents for pdQ2
































































Reviews:

No comments

Related manuals for pdQ2

Brand: iData Pages: 34

Brand: Panasonic Pages: 10

Brand: Samsung Pages: 2

Brand: Samsung Pages: 78

Brand: Samsung Pages: 34

Brand: Samsung Pages: 38

Brand: Aastra Pages: 9

Brand: Sagem Pages: 72

Brand: Sagem Pages: 63

Brand: Sagem Pages: 77

Yealink SIP-T46G

Brand: Yealink Pages: 8

Brand: Yealink Pages: 3

Brand: EASY3CALL Pages: 40

Brand: Avaya Pages: 237

Brand: Orinoquia Pages: 26

Brand: ProClip Pages: 2

Brand: Centrality Pages: 59

Aastra 9133i IP

Brand: ADTRAN Pages: 31

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands