Kyocera pdQ2 User Manual Download Page 51

Page: 51 / 63

Phone care

DRAFT

❑

Protect the pdQ

from temperature extremes. Do not leave it on the

dashboard of a car on a hot day, and keep it away from heaters and
other heat sources. Store it out of direct sunlight.

❑

Do not store or use the pdQ

in any location that is extremely dusty,

damp, or wet.

❑

Use a soft, damp cloth to clean the phone. Clean the screen with a soft
cloth moistened with a diluted window-cleaning solution.

❑

Avoid using suntan lotion around the phone. Chemicals in suntan
lotions can damage your phone.

Antenna

Follow these guidelines to get the best reception.

❑

Fully extend the antenna when you place or receive a call.

❑

Do not touch the antenna while you are on a call. Do not bend or
twist the antenna.

❑

When using the headset, keep the headset wire away from the
antenna.

❑

When using the phone to connect to the Internet or send and receive
email, make sure the extended antenna is at least 20 centimeters (8
inches) away from other people and is pointed away from them.

Battery

Your pdQ

has a rechargeable lithium ion battery. To charge the battery,

either plug the power cable directly into the phone or plug the power
cable into the cradle and place the phone in the cradle. You can purchase

pdq2_QuickStart.book Page 47 Friday, July 28, 2000 6:37 PM

Summary of Contents for pdQ2
































































Search results

Summary of Contents for pdQ2

Reviews:

Related manuals for pdQ2

Brands by name

Popular brands

Kyocera pdQ2, User Manual

Search results

Summary of Contents for pdQ2

Reviews:

Related manuals for pdQ2

Brands by name

Popular brands