Kyocera KM-6030, Service Manual

Page: 445 / 463

2FB/2FC-2.0
2-4-7
Periodic maintenance procedures
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Test copy
and test print Perform at the maxi-
mum copy size Test copy Every service
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Paper feed
section Paper feed pulleys Replace Every service Replace after feeding
500,000 sheets. P.1-6-3
P.1-6-10
Forwarding pulleys Replace Every service Replace after feeding
500,000 sheets. P.1-6-3
P.1-6-10
Separation pulleys Replace Every service Replace after feeding
500,000 sheets. P.1-6-3
P.1-6-10
MP paper feed pulley Clean
Check and
replace Every service Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets. P.1-6-19
MP forwarding pulley Clean
Check and
replace Every service Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets. P.1-6-19
MP separation pulley Clean
Check and
replace Every service Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets. P.1-6-19
Timing switch 1 Clean Every service Air brush.
Timing switch 2 Clean Every service Air brush.
Timing switch 3 Clean Every service Air brush.
Feed pulley Clean Every service Clean with alcohol or a dry cloth.
Deck conveying roller Clean Every service Clean with alcohol or a dry cloth.
Rollers Clean Every service Clean with alcohol or a dry cloth.
Guides Clean Every service Clean with alcohol or a dry cloth.
Section
Maintenance
part/location
Method Maintenance cycle Points and cautions Page
Main charg-
ing section Main charger unit Clean
Check and
replace Every service Clean the shield with a wet
cloth and then a dry cloth. P.1-6-31
Main charger wire
cleaning pad Replace Every service P.1-6-32
Main charger wire Replace Every service P.1-6-33
Main charger grid Clean
Check and
replace Every service Clean the shield with a wet
cloth and then a dry cloth.
Replace if the grid is damaged
or bending. P.1-6-32