Kyocera KM-6030, Service Manual

Page: 118 / 463

2FB/2FC-3
1-4-43
U234
Setting punch destination
Description
Sets the destination of optional punch unit of document finisher.
Purpose
To be set when installing a different punch unit from the destination of the machine.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the destination.
Initial setting: NOTHING
2. Press the start key. The setting is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
U235
Setting output tray initialize mode
Description
Sets whether or not initialization (shift of eject position to main tray) is performed when auto clear is triggered
if a multi-job tray is installed to an optional document finisher.
Purpose
To be set as required according to the user.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select the item to be set. The selected item is displayed in reverse.
Initial setting: HP ON
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Completion
Press the stop/clear key at the screen for selecting an item.
The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
NOTHING With no punch unit
JAPAN METRIC Metric (Japan) specifications
INCH Inch (North America) specifications
EUROPE METRIC Metric (Europe) specifications
SWEDEN METRIC Metric (North Europe) specifications
Display Description
HP ON Job tray initialization is performed.
HP OFF Job tray initialization is not performed.