manualshive.com logo in svg

Kyocera KM-6030, Service Manual

Share
Download
Kyocera KM-6030 Service Manual Download Page 133

2FB/2FC

1-4-58

U266

Setting the number of days after which to automatically delete documents
Description

Sets the number of days to save documents on the HDD before automatically deleting.

Purpose

To change the number of days to retain data that is saved within the auto-delete area of the HDD before auto-
matically deleting.

Method

Press the start key. The current setting is displayed.

Setting

1. Change the setting using the cursor up/down keys.

2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. 
The screen for selecting a maintenance item No. is displayed.

U277

Setting auto application change time
Description

Sets the time that passes until the machine starts automatically printing after completing copying or operation
when the machine is used as a printer (only if the printer kit is installed).

Purpose

According to user request, changes the setting.

Method

Press the start key. The current setting is displayed.

Setting

1. Change the setting using the cursor up/down keys.

The setting can be changed by 30 s per step.

2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. 
The screen for selecting a maintenance item No. is displayed.

U281

Setting stamp mode ON/OFF
Description

Sets ON/OFF of the stamp mode.

Purpose

To turn the setting on, in order to manage, by which machine it was printed.

Method

Press the start key. The screen for selecting an item is displayed.

Setting

1. Select ON or OFF. The selected item is displayed in reverse.

Initial setting: OFF
When setting turns to ON, set a stamp number using the numeric keys.

2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.

Completion

To exit this maintenance item without changing the current setting, press the stop/clear key. 
The screen for selecting a maintenance item No. is displayed.

Maintenance

item No.

Description

Description

Setting range Default setting

Number of days after which to automatically delete documents

0 to 7

0

Description

Setting range

Default setting

Switching time

30 to 270 (s)

30 (s)

Display

Description

ON

A stamp function is used.

OFF

A stamp function is not used.

Summary of Contents for KM-6030
















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands