Kyocera Ecosys M6526cdn, Operation Manual

Page: 119 / 204

Checking Transmission Results and Registration Status
5-6
10
Press the  or  key to select [Off] (not to print),
[On] (to print), [Error Only] or [Specify Each Job].
11
Press the OK key. Proceed to the next step if you
selected [On], [Error Only] or [Specify Each Job] in
step 10.
12
Press the  or  key to select [Off] (do not print
transmitted image), [Partial Image] (print
transmitted image at full size) or [Full Image] (print
all of the transmitted image) for attachment of the
transmitted image.
FAX RX Result Reports
Each time you receive a fax, you can print a report to confirm whether the fax was received successfully.
NOTE:
Fax receipt can also be notified by e-mail instead of checking the receipt result report. (Refer to
Reporting FAX Receipt Result by E-mail on page 5-11. )
1
Press the System Menu/Counter key.
2
Press the

or

key to select [Report].
3
Press the OK key.
4
Press the

or

key to select [Result Rpt Set.].
5
Press the OK key.
FAX: a b
*********************
2 On
3 Error Only
1 *Off
Send Result Report
Co m pleted
With transmitted image
Co m pleted
Send Result Report
Without transmitted image