Kyocera ECOSYS FS-1135MFP Operation Manual Download

Page: 84 / 180

FAX Operation (Advanced)

4-30

Checking Details and Renaming Files

You can use the procedure below to check the details of documents forwarded to a Sub Address Box. You can also
use this procedure to rename files.

Follow steps 1 to 5 in

Printing Originals from a Sub

Address Box on page 4-28

Press the





key to select the document, press

[Menu] (the

Left Select

key).

Press the





key to select [Detail/Edit], press the

key.

Press the





key to move the item to be changed,

and press [Edit] (the

Right Select

key).

The details for the selected original are displayed.

Use the numeric keys to edit the item.

Repeat the step 4 and 5 for the other items.

Item

Description

File Name

File name of the original
Press [Edit] to rename the file.

Number of Pages

Number of pages in the original

Resolution

Resolution of the original

Date and Time

The date and time the original was forwarded.

Summary of Contents for ECOSYS FS-1135MFP





















































































































































































Search results

Summary of Contents for ECOSYS FS-1135MFP

Reviews:

Related manuals for ECOSYS FS-1135MFP

Brands by name

Popular brands

Kyocera ECOSYS FS-1135MFP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1135MFP

Reviews:

Related manuals for ECOSYS FS-1135MFP

Brands by name

Popular brands