Kyocera ECOSYS FS-1135MFP Operation Manual Download Page 151

Page: 151 / 180

About Network FAX

7-3

Setup

The following preparation is needed before using Network FAX.

Flow of Setup

Connection to a PC

Connect the machine to a PC using the network cable. For details, refer to the machine’s

Operation Guide

Machine Registration

Using the memory transmission function, select the recipient PC or file format.

NOTE:

Use the memory transmission function to forward the received fax to the PC or forward it as an e-mail

attachment. For details, refer to

Printing/Forwarding Received Documents (Memory Forwarding) on page 4-13

Installing Software on the PC

Install the dedicated software (included in the supplied DVD) on your PC required to use Network FAX. For details,
refer to the

Network FAX Driver Operation Guide

contained in the included DVD.

Network FAX Driver Operation Guide

The

Network FAX Driver Operation Guide

(Online Manual) is contained in the included DVD in PDF (Portable

Document Format). The main contents include the following.

• Installing Network FAX Driver
• Performing Network FAX Sending
• Specifying the Network FAX Transmission Settings
• Specifying the Cover Letter Settings

Opening the Online Manual

Follow the steps below to refer to the online manual.

Insert the DVD supplied with the machine into the DVD
drive.

An explanation of the licensing agreement

displayed. If you agree to the terms of the agreement,
click

Accept

. The main menu screen then appears.

Click

Software Documentation

, and then

Network FAX

Driver

. The online manual appears.

NOTE:

Adobe Reader 8.0 or later needs to be installed to

view the online manual.

Summary of Contents for ECOSYS FS-1135MFP





















































































































































































Search results

Summary of Contents for ECOSYS FS-1135MFP

Reviews:

Related manuals for ECOSYS FS-1135MFP

Brands by name

Popular brands

Kyocera ECOSYS FS-1135MFP, Operation Manual

Search results

Summary of Contents for ECOSYS FS-1135MFP

Reviews:

Related manuals for ECOSYS FS-1135MFP

Brands by name

Popular brands