manualshive.com logo in svg

Kyocera Mita DP-2800, Instruction Handbook Manual

Share
Download
Kyocera Mita DP-2800 Instruction Handbook Manual Download Page 75

Control panel

2-7

Indicator

Name

Description

Multi-purpose feed

indicator

Flashing: Indicates that there is no paper in the tray or that
paper is jammed near the multi-purpose tray.
Lit: Indicates when paper is fed from the multi-purpose
feed tray.

Optional paper feeder

indicator

Flashing: Indicates that there is no paper in the optional
envelope feeder (EF-100) or universal feeder (UF-100); or
that paper is jammed near the paper feed opening.
Lit: Indicates that paper is being fed from the optional
envelope feeder (EF-100) or universal feeder (UF-100).

Duplex printing

indicator

Flashing: Indicates that paper is jammed in the optional
duplex printing unit (AD-31).
Lit: Indicates that the printer is printing in duplex mode
when the optional duplex printing unit (AD-31) is installed.

ON LINE

On-line indicator

Lit: indicates that the printer is on-line. The printer prints
received data.
Off: The printer is offline. The printer stores but does not
print received data.

DATA

Data indicator

Flashing: Indicates data transfer is taking place.
Lit: Indicates either that data is being processed, or that
data is being written to the memory card.

ATTENTION

Attention indicator

This indicator indicates a problem that may be resolved by
the user.
Off: Indicates operations are normal.
Flashing: Indicates that the printer needs maintenance.
Check the message display for details and take
appropriate action.
Lit: This indicates that the printer cannot print due to no
paper in the cassette or similar reason. Check the
message display for details and take appropriate action.

Summary of Contents for DP-2800


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands