Kyocera Mita DP-2800, Instruction Handbook Manual

Page: 108 / 249

Chapter 2 Operating the Page Printer
2-40
Memory Card
This printer is equipped with a memory card slot. This allows, for example, the use of fonts other than
internal fonts by using an optional font card. If a JEIDA Ver. 4.2 memory card is used, it is possible to
read, write and delete data and format the memory card.
Note ______________________________________________________________________
Only 32 MB or less flash or S-RAM type memory card conforming to JEIDA Ver. 4.2 can be written or
formatted by this printer.
It is possible to set the partitions on the memory card which you wish to execute for the printer at
power-on by using the PRESCRIBE 2e FRPO I0 command. For details on the FRPO command,
please read the
Programming Manual on the supplied CD-ROM.
A font card can be read from the control panel or read automatically upon power-on or printer reset
when a font card is inserted in the printer.
Inserting Memory Card
Carefully insert the memory card as far as it will go with the top side facing right (back side of the
printer).
Memory Card Slot
Memory Card