manualshive.com logo in svg

KYMCO UXV500, Owner'S Manual

Share
Download
KYMCO UXV500 Owner'S Manual Download Page 82

80

Crankcase Emission Control System

Your UXV500’s engine is equipped with a closed crankcase system. Blow-by gases are routed back in to the combustion
chamber via the intake  system. This system does not allow the blow-by gases to enter the atmosphere.

Exhaust Emission Control System

The exhaust emissions from your UXV500 are controlled by engine design, factory-set fuel delivery, ignition settings, and
exhaust system design. This system also includes a secondary air supply system and a catalyzer in the exhaust system.

Noise Exhaust Emission Control System

The engine, intake and exhaust systems of your UXV500 were designed to comply with federal, state and local noise level
requirements. Do not modify the engine ,intake or exhaust components, as doing so will affect compliance these noise level
requirements.

Please do not modify or change any KYMCO-designed components that may alter the sound or emission level from

your UXV500.

 EMISSION CONTROL INFORMATION

Summary of Contents for UXV500

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands