manualshive.com logo in svg

KYMCO UXV500, Owner'S Manual

Share
Download
KYMCO UXV500 Owner'S Manual Download Page 16

14

Indicates a potential hazard that could

result in serious injury or death.

POTENTIAL HAZARD

Operating your UTV on paved surfaces.

WHAT CAN HAPPEN

Your UXV500’s tires are designed for off-road use only, not for use on pavement. Paved surfaces may seriously affect vehicle handling and may result in
your inability to control the vehicle.

HOW TO AVOID THIS HAZARD
Never operate your UXV500 on any paved surface, including, but not limited to, sidewalks, driveways, parking lots, or streets.

POTENTIAL HAZARD

Operating your UTV on public streets, roads, or highways.

WHAT CAN HAPPEN

You can collide with another vehicle.

HOW TO AVOID THIS HAZARD

Never operate your UXV500 on a public street, road, highway, or even a dirt or gravel road. In many states it is illegal to operate this type of vehicle on
public streets, roads, or highways.

 WARNINGS

POTENTIAL HAZARD

Operating your UTV without wearing eye protection.

WHAT CAN HAPPEN

Operating an off-road vehicle without eye protection can result in an accident and increases your chances of a severe injury, including loss of sight in the
event of an accident.

HOW TO AVOID THIS HAZARD

Always wear an eye protection (goggles or helmet face shield).

Summary of Contents for UXV500

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands