manualshive.com logo in svg

KYMCO UXV500, Owner'S Manual

Share
Download
KYMCO UXV500 Owner'S Manual Download Page 44

42

Indicates a potential hazard that could

result in serious injury or death.

EQUIPMENT

The last thing you would expect is that your KYMCO UTV would
break down in the middle of a field. KYMCO products are usu-
ally so reliable that sometimes you forget that your UTV, like
any machine, has service needs and usage limitations.

UTV MAINTENANCE

You have to maintain your UTV for your safety, its operational
integrity and to protect your investment. The General Mainte-
nance section of this Owner's Manual tells you how to take
care of your UTV. If at any time abnormal noises, vibrations, or
improper operation of any component on your UTV is detected,
DO NOT OPERATE YOUR UTV. Take your UTV to an autho-
rized KYMCO dealer for inspection, adjustment or repair.

CARGO LIMITATIONS

One of the reasons why multiple passengers are prohibited on
UTVs is because their presence disrupts the weight and bal-
ance of the vehicle. Cargo will do the same if it weighs too
much or is positioned improperly. Limit your UTV to the load
capacity ratings identified in the chart on the following page.
So if you, your passenger and your load weighs over 771 lb
(350 kg), leave some of that extra cargo at home. The com-
bined weight limit, including you, your passenger, your UTV’s
bed cargo, and your trailer, is a specific amount, so consult
the UTV Load Capacity Ratings Chart and adjust your load
accordingly.

 SOUND JUDGMENT

Cargo has such a significant affect on UTV handling that you
need to adjust your speed to match your load. Even on level
ground, you should keep your UTV's speed below 10 MPH (16
kph) if you are towing a trailer. Avoid uneven terrain when tow-
ing a trailer. Do not forget that your braking distance is going to
increase as you carry more weight or if you tow a trailer.

   Think about these factors when dealing with cargo:

1. Cargo bed weight limit
2. Trailer weight limit
3. Weight distribution
4. UTV speed

PERSONAL CHOICES

A safe, enjoyable UTV drive is dependent on many personal
choices. A UTV, like all motorized vehicles, can be dangerous
to operate if you choose to ignore safety precautions, take un-
necessary chances, or ride beyond your ability or your machine's
capability. Don't allow the thrill of freedom or adventure to af-
fect your ability to make good, safe choices.

Summary of Contents for UXV500

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands