60
Clearing the Tripmeter
To clear the tripmeter’s mileage, select the trip meter you wish
to clear, then press and hold the SET and MODE buttons si-
multaneously for two seconds. This will clear the mileage (“zero
the tripmeter”) on the selected tripmeter display.
Once the clock display is flashing, you can set the hours and
the minutes. Press the MODE button to change the HOURS
setting. Press the SET button to change the MINUTES setting.
FEATURES & CONTROLS
Setting the Clock
To set the clock’s time, cycle the odometer/tripmeter until the
odometer mileage is displayed. Then press and hold the SET
and MODE buttons simultaneously until the clock display be-
gins to flash.
Once you have set the desired time, press and hold the SET
and MODE buttons simultaneously to complete the clock set-
ting (the clock display will stop flashing).
MODE button
HOURS
SET button
MINUTES
Summary of Contents for UXV500
