KYMCO UXV500, Owner'S Manual

Page: 39 / 88

37
Indicates a potential hazard that could
result in serious injury or death.
Do not attempt to free frozen brakes by pouring warm
water on the brake pads, brake rotors or drums.
ACTIVE DRIVING
STOPPING YOUR UTV
To stop your ATV, first release the accelerator pedal, then de-
press the brake pedal smoothly.
STOPPING YOUR UTV’S ENGINE
To stop your UTV's engine, turn the ignition switch key to the
OFF position.
4. Practice driving in an open snow-covered or ice-covered
area at slow speeds before driving on snow-covered or ice-
covered trails
5. Pay attention to how your UTV responds to steering and brak-
ing on the type of terrain you will encounter on your trail ride
„ „
„ „
„ NOTE: After riding through water, mud, snow, or
slush, it is important to dry the brake system before
parking your UTV.
Ride slowly and be extra careful when riding on snow-
covered or ice-covered terrain. Always be alert to
changing terrain conditions when operating your UTV
in cold or wet weather.
„ „ „ „ „
NOTE: Remember to turn the ignition switch to the
OFF position if your UTV is not going to be ridden
so you will not deplete the battery’s energy.
„ „
„ „ „
NOTE: After the brakes thaw, dry them by applying
them several times while riding slowly.