manualshive.com logo in svg

KYMCO UXV500, Owner'S Manual

Share
Download
KYMCO UXV500 Owner'S Manual Download Page 21

19

Indicates a potential hazard that could

result in serious injury or death.

POTENTIAL HAZARD

Improperly crossing hills or turning on hills while riding your UTV.

WHAT CAN HAPPEN

Improperly crossing hills or turning on hills may cause you to lose control of your UXV500 or cause the vehicle to overturn.

HOW TO AVOID THIS HAZARD

Never attempt to turn your UXV500 around on any hill until you have mastered the turning and steering techniques described in this Owner's Manual.
Practice these maneuvers first on level ground. Be very careful when turning your UXV500 on any hill, and avoid crossing the side of a steep hill, if
possible.
When crossing the side of a hill on this type of vehicle:

* Always follow proper driving procedures as described in this Owner's Manual
* Avoid hills with slippery or loose surfaces

 WARNINGS

POTENTIAL HAZARD

Stalling, rolling backwards, or improperly exiting the vehicle while climbing a hill on your UTV.

WHAT CAN HAPPEN

Stalling, rolling backwards, or improperly exiting could result in the vehicle overturning.

HOW TO AVOID THIS HAZARD

Select the proper transmission gear and maintain a steady speed when climbing

If you lose all forward speed:

* Apply the brakes
* Engage the parking brake after you are stopped

If you begin rolling backwards:

* Apply the brakes while rolling backwards
* When the vehicle comes to a full stop, engage the parking brake and carefully exit the vehicle on the uphill side, or to the side pointed uphill
* Obtain assistance and turn the vehicle around so it faces downhill and carefully get back into the vehicle to drive it downhill following the
  procedure described in this Owner's Manual

Summary of Contents for UXV500

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands