KYMCO G-Dink 125i, Manual

Page: 136 / 451

2. Engine > Camshaft G-Dink 125i
52
Install the camshaft sprocket onto the camshaft so the camshaft
sprocket boss fits into the appropriate hole on the camshaft sprocket.
Make sure the camshaft sprocket boss is facing up so it is visible above
the edge of the cylinder head as shown. Align the horizontal marks on
the camshaft sprocket with the top edge of the cylinder head as shown.
Fit the camchain over the camshaft sprocket.
For correct engine timing the marks on the camshaft sprocket must be
even with the cylinder head mating surface at the same time the "T"
mark is lined up with the with the index notch in the timing inspection
hole. The camshaft lobes should be facing down and their should be
slack in the rocker arms.
The rod must be held in the cylinder until the cam chain tensioner
mounting bolts have been installed.