Interface Module Installation
9
list the models of the interface modules.
Note
：
Not all the slots require interface modules. Choose slots as needed.
3.1.1 Installing Mounting Brackets
Before inserting a 0.5U interface module into an upper or lower slot, install mounting
brackets on the module as follows:
Select an applicable 0.5U interface module. Insert two mounting brackets into the screw
holes at both sides of the module. Push the brackets in direction 1 until the brackets are
firmly secured to the module.
Figure 3 Installing Mounting Brackets
3.1.2 Inserting a 0.5U Interface Module into an Upper Slot (Slot 2, Slot 4, or Slot 6)
Step 1: Insert the guide rail of the interface module into the guide rail slot with "TOP" facing
up. Then push the module into the slot along the guide rail slot until it is in position.
