Switch Access
35
Figure 30 Setting Port Parameters
Step 6: Click OK to enter the switch CLI. Then the following commands can be used to
perform operations.
Table 16 CLI Commands
View
Command
Description
General mode
SWITCH>enable
Enter the privileged mode.
Privileged mode
SWITCH#show interface vlan 1
Query the default IP address of the switch.
Privileged mode
SWITCH#show version
Query the version of the switch.
Privileged mode
SWITCH#reboot
Restart the switch.
Privileged mode
SWITCH#set default
SWITCH#save
Restore the factory default settings
(including the IP address).
Privileged mode
SWITCH#config terminal
Enter the configuration mode.
7.2 Access through Telnet
Step 1: Connect the network port of a PC to the Ethernet port of the switch with a network
cable.
