Switch Installation
16
brackets. If there are screws inserted in the screw holes, remove the screws and keep them
for future use.
As shown in the following figure, use four screws to secure two mounting brackets to the
switch respectively.
Figure 10 Installing Mounting Brackets
Mounting
Step 1: Select the mounting position for the switch and guarantee adequate space and heat
dissipation (house dimensions: 440mm×44mm×360mm).
Step 2: Move the switch in direction 1 until the screw holes for securing the mounting
brackets to rack posts are in alignment with the corresponding holes in the rack
posts. Then use four screws and supporting captive nuts to secure the mounting
brackets to the rack posts.
Figure 11 Mounting
Dismounting
Step 1: Remove the four screws and supporting captive nuts securing the mounting brackets
