Item Description
Roving analysis
state
Enabled and disable monitor port
Analysis port
Analysis port is to watch the communication of all
monitor ports. You can connect the sniffer port to LAN
analyzer or netxray.
Monitor port
The port to be monitored. The flow of all monitored
ports will be copied to sniffer port. To invalidate this
function, you can select as no monitor ports.
Monitor Rx
Monitor receiving frame of port.
Monitor Tx
Monitor sending frame of port.
4.4.10
SNMP
If management information base is installed correctly in the managing end,
any management operating SNMP can manage the switch. SNMP is a
protocol, which control the information transmission between manager and
agent. In our system, SNMPV1 is supported.
You can define the manager PC as trap managers and input SNMP group
name in this page. You can also define a name, location and contacts for the
switch. Click the “apply” to update this page settings after inputting system
data.
Table4-10 SNMP Parameters
Item Description
Name
Input name of switch.
location
Input location of switch.
Contact
Input personal or
community name.
